Fast company logo
|
advertisement

STARTUP REPORT

Here’s what it feels like to sprout an extra pair of robot arms

In its current form, this Japanese robotic assembly is weird and ungainly. But the technology has intriguing possibilities.

Here’s what it feels like to sprout an extra pair of robot arms

[Photo: sergeyryzhov/iStock]

BY Harry McCracken3 minute read

Like many people, I’ve often wished for another pair of hands to juggle complex tasks. I’ve assumed I’d be in charge of them. But that was not the case when I strapped on a robotic assembly called Fusion at the CEATEC tech trade show—Japan’s equivalent of our CES.

Instead, this wearable gadget had a second person controlling my bonus robotic arms through an Oculus Rift S virtual-reality headset. That turned out to tricky for both of us.

The Fusion operator has to move the Oculus controllers in the right direction and manipulate them correctly—a joystick to direct each robotic thumb, then buttons to open or close each robotic index finger or the combined last three digits on each non-human hand. (That last limitation meant that I could not flip off anybody with the Fusion’s middle fingers.)

Working these controls was frustratingly non-obvious, as I struggled to get one electronic extremity to grasp a paper cup and use the other to drop a plastic ball in the cup. It was as if I’d just evolved opposable thumbs.

Merely seeing these hands in the Oculus headset was tricky, because they kept swimming out of reach at the bottom of the view provided by that VR device’s head-worn display.

[Photo: courtesy of Rob Pegoraro]
Donning the Fusion equipment provided a different challenge. You wear 26 pounds of gadgetry like a backpack that happens to be stuffed with servos and software, with straps to hoist over each shoulder and two straps to fasten across your chest.

It felt weirdly alive, with actuators rumbling across my back to drive the arms and hands. A separate assembly with paired cameras and microphones perched over my shoulder like a cybernetic second head.

Then I watched the hands that weren’t mine attempt to repeat the same task of picking up the paper cup, picking up the ball, and dropping the latter into the former

Looking at these metal-and-plastic appendages hovering in front, I realized that my operator could punch me in the face. But he was no more successful than I at wielding them, and instead fumbled the cup, the ball, or both.

So while my first look at this getup made me think I’d become Ripley from Aliens wearing her exosuit, the reality was much more frail. Even when operated by people who knew what they were doing and could reliably transfer that ball into that cup, Fusion’s hands shook visibly in an idle state, a consequence of the vibrations of its motors resonating through those metal arms.

From training to travel

In its current form, Fusion is ungainly. But the possibilities for the technology, a project of Keio University’s Graduate School of Media Design that was also shown off at the SIGGRAPH conference in Vancouver last year, are intriguing. This “Full Body Surrogacy for Collaborative Communication” system allows for such possibilities as collaborative work and assisted learning. You can imagine a version with finer motor control allowing an expert to train a newcomer by walking through various forms of complex craftsmanship.

advertisement
[Photo: courtesy of Rob Pegoraro]
“We are trying to optimize the design of it,” saidMHD Yamen Saraiji, project senior assistant professor at Keio, while tightening some screws on one of the demo models at CEATAC. He said the current generation cost about 10 million yen, or roughly $92,000. “It’s really not that high of a number for robotics.”

For all the work Fusion may need, in this trade-show context it works as an attention magnet. It figured in a Tuesday-afternoon keynote from ANA, when Shinya Katanozaka, the airline’s CEO, briefly put one on. It also drew crowds at ANA’s exhibit on the floor of the Makuhari Messe convention center outside Tokyo.

[Photo: courtesy of Rob Pegoraro]
Why would an airline be interested in robotic arms? ANA envisions providing avatars as a service that could take the place of travel, in the form of“newme” telepresence robotsshown off at CEATAC. It’s alsosponsoring an X-Prize competitionto develop“an Avatar System that will transport a human’s sense, actions, and presence to a remote location in real time, leading to a more connected world.”

As part of that, ANA has supported the development of the last two versions of Fusion, ANA Avatar Division co-director Kevin Kajitani told me by email.

Asking for personal-extension robots to take the place of travel may seem only slightly less ridiculous than trying to build an Iron Man suit. But after weather-induced flight cancellations and subsequent re-routing stretched my journey to Tokyo into a two-day, three-country, four-flight trek, I’m a little less prepared to rule out that concept.

(Disclosure: CEATEC’s organizers covered my travel costs, along with those of a handful of other U.S.-based tech journalists.)

PluggedIn Newsletter logo
Sign up for our weekly tech digest.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Privacy Policy

ABOUT THE AUTHOR

Harry McCracken is the global technology editor for Fast Company, based in San Francisco. In past lives, he was editor at large for Time magazine, founder and editor of Technologizer, and editor of PC World More


Explore Topics